Loading... Please wait...Categories
Add to Wish List
Related Products
-
Vepr .308 magazine 10 round $45.00
-
Vepr 6.5G 10 round $51.00
-
AK 6.5G 10 round $51.00
-
-
9x39 20 round $49.00
You Recently Viewed...
New Products
Our Newsletter
- Home
- Centerfire Rifle
- 9X39 AK pattern
- 9x39 10 round
Product Description
In stock
If used for a 9x39 AK build, please be aware that the receiver and trunnion need to be slightly pocketed for clearance,
as the front of the magazine is wider than a normal AK magazine.
If used with AR rifles with AK magazine wells the magazine spring must be changed.
We will supply the springs at request at no charge. Please email with your order and add a note in order comments.
Magazine is all steel construction, with a black nitride finish.
Weight of empty magazine is 5.4 ounces.
Magazine has full capacity view holes on each side.
Floor plate is marked USA, magazine counts as 3 US made parts for 922r compliance.
Product Reviews
-
Need work for ks47
Posted by Unknown on 9th Dec 2020
Ordered these for a g1 ks47 knowing they would require removal of a bit of material on the receiver to fit.
Once that was complete I then found that the feed lips are too low to feed properly with an ar style bolt.
This is an issue I also experienced with croatian mags when running 7.62x39.
Upon bending/raising the feed lips up high enough to feed properly I found they are just barely holding the cartridges in the magazine.
I'm still certain I can make these work ok but they are far from perfect.
I emailed csspecs several weeks ago with my concerns and request for higher feed lips and have not had any response.
Csspecs: We did email you, check your spam box.. The magazine feed lips are not too low, the lock up points on your rifle are too low, its happening on multiple types of magazine. Also there is a different spring that can be used in the magazines that slightly changes the feed angle.
My understanding is that the newer 7.62x39 ks47 brought the magazines higher in the receiver, so they likely realized there was an issue with their original placement.
-
mags work great!
Posted by Unknown on 24th Nov 2019
I used a KS47 lower to build an 'AR' 9x39. Since the 9x39 mag is wider at the front the lower required some minor clearancing to allow the mags to insert. Mags now snap in, feed great and function great.